CD74HC4316M96 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -55°C~125°C TA. 16 terminations have been made so far. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. Multiplexers built on a SPST - NO switching circuit are built. Try searching for the analog switch ic with 74HC4316 if you are looking for variants. As far as internal resistance is concerned, it has 170Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 2V. Put voltage above 16μA on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 5V. When using dual power supplies, you should attach at least 1V. 200MHz-bandwidths can be used to transfer data between multiplexers. Check out the electrical component's additional features, such as the following: ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY.

CD74HC4316M96 Features

4 Channels
Switch Circuit: SPST - NO
Bandwidth: 200MHz
Additional Features: ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY

CD74HC4316M96 Applications

There are a lot of Texas Instruments
CD74HC4316M96 Analog Switches & Multiplexers ICs applications.

• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions