CD74HC4518E Overview

This is a device supplied in the 16-DIP (0.300, 7.62mm) package. There are 16terminations used for configuring it. The supply voltage of 4.5V permits it to operate with full flexibility. There are 2 terminations on the device. There are a total of 16 pins in all components. As a result, it is packaged as Tube. As part of the circuit, there are 16pins used to connect other components. It is mounted in the direction of [0]. The HC/UHfamily is derived from it. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. Counter, Decadeis selected as the logic type. In this case, the operating temperature should be set to -55°C~125°C. Having a mounting type of [0], it is suitable for installation. By providing the supply voltage of [0], it is capable of operating more reliably. The array stores 4bits in each element. These electronic devices have many important features, and NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLEis one of them. There are more related parts under the 74HC4518base part number. There is 2V minimum supply voltage (Vsup) for this device. With a frequency of [0], it operates. It is possible to reach a maximum supply voltage of 6VV (Vsup). In the state of [0], it consumes quiescent current.

CD74HC4518E Features

Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLE
Frequency of 60MHz

CD74HC4518E Applications

There are a lot of Texas Instruments
CD74HC4518E Counters & Dividers applications.

• Frequency dividing circuits
• Time delay circuits
• Communications Digital Frequency Synthesizers;
• VHF, UHF, FM, AM, etc.
• Fixed or Programmable Frequency Division
• Time Out Timer for Consumer-Application Industrial Controls
• Timing applications
• Clocks
• Up Counters
• Dual Up Counters