CD74HC574MG4 Overview
SOICis the way it is packaged. In total, it contains 1 elements. There are 20 terminations,Power is supplied from a voltage of 4.5V volts. HC/UHis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. A total of 20pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. The flip flop has 2ports embedded within it. There are 3 output lines on it. Despite external influences, it consumes 8μAof quiescent current. There is -7.8mA output current at the high level. There is 7.8mA output current at the low level. It is recommended that the operating temperature be lower than 125°C. A temperature above -55°Cshould be used for the operation. Initially, it requires a voltage of 2V as the minimum supply voltage. It is capable of supporting a maximum supply voltage of 6V. 60MHzis the maximum frequency that can be achieved. This logic IC is BUS DRIVER. A total of 1 functions are provided by this T flip flop. With 20 pins, it is equipped with a low power consumption. As a result of the output current of 7.8mA, the design flexibility is maximized.
CD74HC574MG4 Features
20 pins
1 Functions
20 pin count
CD74HC574MG4 Applications
There are a lot of Texas Instruments
CD74HC574MG4 Flip Flops applications.
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
