CD74HCT377E Overview

The item is packaged in 20-DIP (0.300, 7.62mm)cases. D flip flop is embedded in the Tube package. Non-Invertedis the output configured for it. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. -55°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. The 74HCTseries comprises this type of FPGA. There should be no greater frequency than 50MHzon its output. A total of 1elements are contained within it. There is 8μA quiescent consumption. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. D latch belongs to the 74HCT377 family. A voltage of 5V provides power to the D latch. Its input capacitance is 10pFfarads. A device of this type belongs to the family of HCT. A part of the electronic system is mounted in the way of Through Hole. This board is designed with 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. It is designed with 8bits. An electrical current of 5V volts is applied to it. Optimal efficiency requires a supply voltage of 5V. It is designed with 3 output lines. As an additional reference, you may refer to electronic flip flop WITH HOLD MODE. The number of channels is growing strong/weak: 8.

CD74HCT377E Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

CD74HCT377E Applications

There are a lot of Texas Instruments CD74HCT377E Flip Flops applications.

• Circuit Design
• Storage Registers
• Storage registers
• Asynchronous counter
• Synchronous counter
• Control circuits
• Modulo – n – counter
• Individual Asynchronous Resets
• Frequency Divider circuits
• Latch