CD74HCT4053PWT Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 2:1. Increasing operating temperature to around -55°C~125°C TA. 16 terminations have been made so far. A 3 channel electronic part produces high-quality output. A 4.5V voltage supply should turn on and run the electronic component. It is part of the design of the 16 series that this electronic component is included. On the other hand, analog switches can be constructed using SPDT switching circuits. A 3 circuit is present in this switch device. Try searching for the analog switch ic with 74HCT4053 if you are looking for variants. Internally, this switch multiplexer has a resistance of 180Ohm. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The digital multiplexer has a low cost Dual, Single supply. In order for the electronic part to function properly, the lowest voltage should be 4.5V. For this switch, a dual supply voltage is feasible, but it must not exceed 5VFor dual power supplies, a voltage of at least 1V should be attached. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. There is a voltage range of 5V operating voltages for the electrical part. The 6 inputs need to be operated in order to work. There are 200MHz bandwidths for data transfer. It is able to conduct in a 2-bit way.

CD74HCT4053PWT Features

3 Channels
Switch Circuit: SPDT
Bandwidth: 200MHz
2-Bit

CD74HCT4053PWT Applications

There are a lot of Texas Instruments CD74HCT4053PWT Analog Switches & Multiplexers ICs applications.

• Channel Banks
• Communication systems
• Channelized and Unchannelized DS3 applications
• PCMCIA cards
• Video switching
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• USB 1.1 signal switching circuits
• Voice over IP/DSL – Integrated Access Devices, Smart
• Audio signal routing
• Automatic test equipment