CDC2351DBR Overview

A 24-SSOP (0.209, 5.30mm Width) case is used for packaging. This package is packaged in the form of a Tape & Reel (TR). It has 24 terminations. With a supply voltage of 3.3V, it is possible to achieve a high level of efficiency. In this case, it will be mounted by Surface Mount. This electronic component falls under the classification of Fanout Buffer (Distribution). To ensure reliable performance, the temperature should be set to 0°C~70°C. It should be capable of operating with a power supply of 3V~3.6V volts. It has been positioned in the way of Surface Mount. On this board, there is a pin count of 24. Operation is performed using the 24 pins. As a member of the CDC2351 family, it falls under that category. I have enclosed this circuit clock in Clock Drivers for your convenience. A maximum supply voltage (Vsup) is set to 3.6V. The supply voltage (Vsup) should be maintained above 3V in order for the clock divider to operate normally. By default, output 10 is set. It is recommended that the supply voltage be kept at 3.3V for maximum efficiency. A quiescent current of 15mA is consumed, and its external influences are unaffected. As long as the frequency is set to 100MHz, excellent accuracy can be maintained. In this case, it uses TR packing.

CDC2351DBR Features

24 terminations
The operating temperature of 0°C~70°C degrees
Clock Drivers subcategory
at 100MHz frequency

CDC2351DBR Applications

There are a lot of Texas Instruments CDC2351DBR Clock Buffers & Drivers applications.

• OTN
• Peak detection
• Other clock/data distribution
• DDR4 JEDEC standard RDIMM design
• Synchronous optical network (SONET)
• Network attached storage
• Data center
• Microserver
• High performance communication system
• Line receiver and signal recovery