CDC2351QDBRG4 Overview

It's a electronic part of the 24-SSOP (0.209, 5.30mm Width) package. This package is packaged in the form of a Tape & Reel (TR). The maximum value for normal operation is 100MHz. A total of 24 terminations have been found in it. It is possible to achieve high efficiency with a 3.3V supply voltage. As a result, it will be mounted by Surface Mount in this case. This electronic part is classified as Fanout Buffer (Distribution). The temperature should be set to -40°C~125°C to ensure reliable performance. Any power source will work, as long as it has 3V~3.6VV. There is a place for it in the way of Surface Mount. It has a pin count of 24. A 24 pin is used for operation. It belongs to the family CDC2351. The clock divider is located in Clock Drivers. This value is set to 3.6V for the maximum available supply voltage (Vsup). In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 3V. Default settings are set to output 10. It is part of the Automotive, AEC-Q100 series of electrical components. For maximum efficiency, the supply voltage should be kept at 3.3V. There is no external influence on it, as it consumes 15mA quiescent current. The method is based on TR.

CDC2351QDBRG4 Features

24 terminations
The operating temperature of -40°C~125°C degrees
Clock Drivers subcategory

CDC2351QDBRG4 Applications

There are a lot of Texas Instruments CDC2351QDBRG4 Clock Buffers & Drivers applications.

• High-performance workstation
• Wired communication field
• High speed line receiver
• Threshold detection
• Switch
• Clock signal duplication
• Artificial intelligence
• Patient diagnosis
• Consumer Electronics
• Storage area network