CDC2510PWRG4 Overview

The Tape & Reel (TR) method is used for packaging clock ICs. The 24-TSSOP (0.173, 4.40mm Width) package includes this clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result, frequency synthesizers can be found to contain 24 terminations. This clock generator ic should receive a voltage of 3.3V. In this clock generator, Clock is used as the input to the clock. To access the full performance of the electronic component, 1 circuits are implemented. The Surface Mount allows this electrical component to be easily installed on the panel. 3.6V would be the maximum supply voltage for this clock generator. A maximum voltage of 3V should be used for this frequency generator for safety reasons. This clock PLL works with a supply voltage of 3V~3.6V. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. A PLL Clock Driver is a classification for the electronic part in question. Clock PLL is equipped with 24 pin count. This part number CDC2510 is related to the following electrical components. The clock PLL has 24 pins that are available. Supply voltage 3.3V is what clock generator can handle. The output frequency is magnified as high as possible with 10 signal outputs. As a result of this digital clock generator, there is a low timing skew at 0.2 ns max. High efficiency is achieved when operating at a frequency of 125MHz.

CDC2510PWRG4 Features

Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC2510PWRG4 Applications

There are a lot of Texas Instruments CDC2510PWRG4 Clock Generators applications.

• Quenching?
• Coherent carrier tracking
• Melting
• Multiplexing communication
• Various decoding circuits
• Main oscillator in receiver
• Infotainment systems
• Televisions
• Wide area power system
• Cell phones