A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. As part of the 48-TFSOP (0.240, 6.10mm Width) package, this clock generator is embedded. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. There are 48 terminations found in the file. The clock generator ic should be grounded with a voltage of 3.3V. This Clock PLL will be fed by LVTTL as its input. To access the full performance of the electronic component, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. 3.6V would be the maximum supply voltage for this clock generator. The supply voltage (Vsup) should be kept above 3V for normal operation. Clock generators should operate with the voltage supply of 3V~3.6V. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. As far as this electronic part is concerned, it can be classified as a PLL Clock Driver component. In particular, this clock PLL is designed to be used with microprocessors. The related electronic parts of part number CDC2516 are listed below. There is an available 48 pin on the clock generators. The maximum supply voltage that clock generator can handle is 3.3V. Fundamentally, this is a kind of Clock Drivers clock PLL. The frequency synthesizer features 16 signal outputs to ensure as high a frequency as possible. There is a low timing skew at 0.2 nsmax with this RF synthesizer. At 125MHz, frequency synthesizer achieves high efficiency. In other words, PLL is capable of delivering a load capacitance of 30pF. A clock generator ic such as this would be well suited to the TR package.
CDC2516DGGRG4 Features
Available in the 48-TFSOP (0.240, 6.10mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V Load capacitance of 30pF
CDC2516DGGRG4 Applications
There are a lot of Texas Instruments CDC2516DGGRG4 Clock Generators applications.