CDC2536DBR Overview

As a clock IC, it uses the Tape & Reel (TR) package. The 28-SSOP (0.209, 5.30mm Width) package contains this clock generator. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. It contains 28 terminations that can be found in frequency synthesizer. Basically, this time clock generator needs a voltage of 3.3V. The input of this clock generator is designed to be LVTTL. To access the full performance of the electronic component, 1 circuits are implemented. With the Surface Mount, it is easy to install this electric component on the panel. For safety reasons, this frequency generator's supply voltage should remain above 3V. This clock PLL works with a supply voltage of 3V~3.6V. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. A PLL Clock Driver is a classification for the electronic part in question. Clock PLL is equipped with 28 pin count. This part number is related to its related electronic parts. The frequency generator is equipped with 28 pins. There is a maximum supply voltage of 3.3V that clock generator can handle. The clock PLL is generally classified as a Clock Drivers device. 6 signal outputs enable clock PLL to magnify output frequency as high as possible. Low timing skew is offered by this RF synthesizer at maximum 0.5 ns. By operating at a frequency of 100MHz, frequency generator is able to achieve high efficiency. This clock generator ic is ideal for the TR package that comes with it.

CDC2536DBR Features

Available in the 28-SSOP (0.209, 5.30mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC2536DBR Applications

There are a lot of Texas Instruments CDC2536DBR Clock Generators applications.

• Myriad digital applications
• Telecommunication systems
• CPUs
• Test equipment
• Wireless handsets
• DVD recorders
• Closed circuit systems
• Motor speed controls
• VSAT (Small Ground Satellite Station)
• High-speed optical transport network (OTN)