CDC337DW Overview

The clock divider is available in 20-SOIC (0.295, 7.50mm Width) case. There is a Tube packaged with it. There are 20 terminations in it. The supply voltage of 5V can be used to achieve high efficiency. As you can see, it is mounted by Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). Setting the temperature to -40°C~85°C will ensure reliable performance. The clock switch should operate with a voltage of 4.75V~5.25VV. It is placed in the way of Surface Mount. There is a pin count of 20 on timeing clock. There is an output of CMOS. Operation is performed with 20 pins. It belongs to the family CDC337. A cut smart buffer of this type is contained in Clock Drivers. It belongs to the family of electronic gadgets known as 337. By default, the output of the circuit clock is set to 8. A supply of 5V volts is needed to power it. The supply voltage should be kept at 5V in order to obtain maximum efficiency. There is no external influence on it, as it consumes 85mA quiescent current. As long as the frequency is set to 80MHz, excellent accuracy can be maintained.

CDC337DW Features

20 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 80MHz frequency

CDC337DW Applications

There are a lot of Texas Instruments CDC337DW Clock Buffers & Drivers applications.

• Base station
• Consumer Electronics
• Synchronous optical network (SONET)
• High-performance server
• Patient diagnosis
• Measurement test
• Data transmission
• Information equipment
• Handheld test instruments
• OTN