CDC341DW Overview

20-SOIC (0.295, 7.50mm Width) case is available for the cut smart buffer. In case Tube, the cut smart buffer is available. A total of 20 terminations can be found in it. Using a supply voltage of 5V allows for high efficiency. As a result, it will be mounted by Surface Mount in this case. The electrical component has a classification of Fanout Buffer (Distribution). It is recommended to set the temperature to 0°C~70°C so the system can perform reliably. The clock switch should operate with a voltage of 4.75V~5.25VV. This item is positioned in the way of Surface Mount. A pin count of 20 can be found on it. Operation is performed with 20 pins. As a member of the CDC341 family, it falls under that category. There is a cut smart buffer contained in Clock Drivers that is used for this purpose. This electronic gadget is a member of the 341 family. By default, the output of the circuit clock is set to 8. There is a 5V volt supply attached to it. Maintaining a 5V supply voltage ensures maximum efficiency. The clock divider consumes 24mA quiescent current and does not react to external factors. As long as the frequency of the clock switch is set to 80MHz, excellent accuracy can be achieved.

CDC341DW Features

20 terminations
The operating temperature of 0°C~70°C degrees
Clock Drivers subcategory
at 80MHz frequency

CDC341DW Applications

There are a lot of Texas Instruments CDC341DW Clock Buffers & Drivers applications.

• Network attached storage
• Line receiver and signal recovery
• Computing
• Edge computing
• High performance communication system
• Furniture
• FPGA
• Backplane
• Navigation equipment
• High speed instrument