Clock ICs are packaged using the Tube method. In the 48-TFSOP (0.240, 6.10mm Width) package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 48 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, LVTTL is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 3.6V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There are 3V~3.6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. It is possible to classify this electronic component as a PLL Clock Driver. An IC that generates clocks specifically for microprocessors, this clock PLL is 48-bits in si48e. The related electrical components for the base part number CDC516 can be found below. A 48 pin is available on the clock PLL. Clock PLL is capable of handling a voltage of 3.3V. A Clock Drivers clock generator is essentially what this device is. The output frequency is magnified as high as possible with 16 signal outputs. The timing skew of this frequency synthesizer is low at 0.2 nsmax. 516-family clock generators are similar. By operating at a frequency of 125MHz, frequency generator is able to achieve high efficiency. Depending on the load capacitance, the analog clock generator can deliver a value of 30pF.
CDC516DGGG4 Features
Available in the 48-TFSOP (0.240, 6.10mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V Load capacitance of 30pF
CDC516DGGG4 Applications
There are a lot of Texas Instruments CDC516DGGG4 Clock Generators applications.