As a clock IC, it is packaged by the Tube method. The 28-SSOP (0.209, 5.30mm Width) package includes this clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are a total of 28 terminations in this file. This electronic frequency generator requires a voltage of 3.3V. It is designed that the Clock PLL's input should be TTL. Using 1 circuits, the electronic part's full performance can be accessed. This component can be conveniently installed on the panel thanks to the Surface Mount. This frequency synthesizer requires a supply voltage above 3V to be safe. Clock PLL works with 3V~3.6V supply voltage provided. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. This is a clock generator compatible with LVTTL logic levels. As far as electrical parts go, this component can be classified as a PLL Clock Driver component. Clock PLL is equipped with 28 pin count. This part number is related to its related electronic parts. Clock generator is designed with 28 pins. The maximum supply voltage that analog clock generator can handle is 3.3V. Clock Drivers-type frequency generators are usually classified as this type. Clock PLL is facilitated with 6 signal outputs to magnify output frequency as high as possible. At maximum 0.5 ns, this analog clock generator has low timing skew. If you search for the 536 family of parts, you will be able to find similar electrical parts. By operating at a frequency of 100MHz, RF synthesizer is able to reali100MHze high efficiency. Depending on the load capacitance, the analog clock generator can deliver a value of 30pF.
CDC536DBG4 Features
Available in the 28-SSOP (0.209, 5.30mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V Load capacitance of 30pF
CDC536DBG4 Applications
There are a lot of Texas Instruments CDC536DBG4 Clock Generators applications.