CDC582PAH Overview

Clock ICs are packaged using the Tray method. In the 52-TQFP package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 52 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, LVPECL is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 3.6V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There are 3V~3.6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. There are several logic levels in LVTTL logic that can be used with this clock generator. It is possible to classify this electronic component as a PLL Clock Driver. An IC that generates clocks specifically for microprocessors, this clock PLL is 52-bits in si52e. The related electrical components for the base part number CDC582 can be found below. A 52 pin is available on the clock PLL. Clock PLL is capable of handling a voltage of 3.3V. A Clock Drivers clock generator is essentially what this device is. The output frequency is magnified as high as possible with 12 signal outputs. The timing skew of this frequency synthesizer is low at 0.5 nsmax. CDC-family clock generators are similar. By operating at a frequency of 100MHz, frequency generator is able to achieve high efficiency.

CDC582PAH Features

Available in the 52-TQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC582PAH Applications

There are a lot of Texas Instruments
CDC582PAH Clock Generators applications.

• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel