Welcome to Hotenda.com Online Store!

logo
userjoin
Home

CDC586PAHR

CDC586PAHR

CDC586PAHR

Texas Instruments

3.3V PLL Clock Driver CDC586 Clock Generators 52 Pins 52-TQFP 52 Terminals Surface Mount 3V~3.6V Tape & Reel (TR)

SOT-23

CDC586PAHR Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 52-TQFP
Number of Pins 52
Weight 258.292505mg
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 4 (72 Hours)
Number of Terminations 52
Type PLL Clock Driver
Subcategory Clock Drivers
Technology BICMOS
Voltage - Supply 3V~3.6V
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Frequency 100MHz
Base Part Number CDC586
Pin Count 52
Number of Outputs 12
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Nominal Supply Current 1mA
Family 586
Output Characteristics 3-STATE
Input LVTTL
Ratio - Input:Output 1:12
Max I(ol) 0.032 A
PLL Yes with Bypass
Differential - Input:Output No/No
Divider/Multiplier Yes/Yes
Same Edge Skew-Max (tskwd) 0.5 ns
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $6.898503 $6.898503
10 $6.508022 $65.08022
100 $6.139644 $613.9644
500 $5.792116 $2896.058
1000 $5.464261 $5464.261
CDC586PAHR Product Details

CDC586PAHR Overview


This clock IC is packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 52-TQFP package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. As a result, frequency synthesizers can be found to contain 52 terminations. This clock generator ic should receive a voltage of 3.3V. In this clock generator, LVTTL is used as the input to the clock. A total of 1 circuits are implemented to access the full performance of the electrical part. With the Surface Mount, it is easy to install this electric component on the panel. 3.6V would be the maximum supply voltage for this clock generator. The supply voltage (Vsup) should be kept above 3V for normal operation. As long as you provide 3V~3.6V supply voltage, it will work. Based on test statistics, ambient temperature should be set at 0°C~70°C. PLL Clock Driver is the type of electrical part that this component is classified as. The clock-generating IC is a 52-bit device designed specifically for microprocessors. These related electrical parts are available for the base part number CDC586. There are a number of 52 pins that are available on the frequency synthesizers. This time clock generator can handle a voltage of 3.3V as its supply voltage. This clock generator can be classified as a kind of Clock Drivers in general. Clock PLL is configured with 12 output. Low timing skew is offered by this RF synthesizer at maximum 0.5 ns. 586-family electronic parts are similar. Using a frequency of 100MHz allows frequency synthesizer to achieve high efficiencies.

CDC586PAHR Features


Available in the 52-TQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC586PAHR Applications


There are a lot of Texas Instruments CDC586PAHR Clock Generators applications.

  • FMCW Radar
  • High-speed communication applications
  • Clock generation systems
  • Reference signals to RF systems
  • 10 Gigabit Ethernet
  • Coherent detection of the signal
  • Modems
  • Simple clock clean-up circuits
  • Coherent carrier tracking
  • Signal analyzer

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News