As a clock IC, it uses the Tube package. As part of the 20-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As a result of this, we can find 20 terminations. This electronic frequency generator requires a voltage of 3.3V. This clock generator receives its inputs from Crystal, which is designed to be the clock source. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 400MHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows this electrical component to be easily installed on the panel. Clock generators should operate with the voltage supply of 3V~3.6V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. The RF synthesizer is compatible with LVTTL logic levels. It is possible to classify this electronic component as a Spread Spectrum Clock Driver. In this IC, a 20-bit frequency generator is designed specifically for use in microprocessors. Related electrical parts can be found for the base part number CDCDLP223. The frequency synthesizer has 20 pins that are available. Clock PLL is capable of handling a voltage of 3.3V. As such, it is often referred to as a kind of Clock Generators clock PLL. Clock PLL is facilitated with 3 signal outputs to magnify output frequency as high as possible. Using a frequency of 20MHz allows frequency synthesizer to achieve high efficiencies. I would like to briefly introduce you to a 2-element frequency synthesizer that performs well with low jitter.
CDCDLP223PW Features
Available in the 20-TSSOP (0.173, 4.40mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CDCDLP223PW Applications
There are a lot of Texas Instruments CDCDLP223PW Clock Generators applications.