Clock ICs are packaged using the Tape & Reel (TR) method. The 48-VFQFN Exposed Pad package contains this clock generator. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 48 terminations. This time clock generator should be voltaged at 3.3V. This clock generator receives its inputs from LVCMOS, LVDS, LVPECL, which is designed to be the clock source. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 1.5GHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. The maximal supply voltage (Vsup) reaches 3.6V. The supply voltage (Vsup) should be kept above 3V for normal operation. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. LVCMOS, LVDS, LVPECL logic levels are supported by this RF synthesizer. This is an electronic part that can be classified as a Clock Generator in this case. An IC that generates clocks specifically for microprocessors, this clock PLL is 48-bits in si48e. The related electronic parts of part number CDCE18005 are listed below. Clock generator is designed with 48 pins. The output frequency can be magnified as high as possible with the assistance of 5 signal outputs. When searching for parts of the CDC family, similar frequency generators will be found. A clock generator ic such as this would be well suited to the TR package.
CDCE18005RGZR Features
Available in the 48-VFQFN Exposed Pad Supply voltage of 3.3V
CDCE18005RGZR Applications
There are a lot of Texas Instruments CDCE18005RGZR Clock Generators applications.
Microwave radio
Integrated phase noise in aerospace systems
Automatic control system test
VSAT (Small Ground Satellite Station)
Navigation, positioning and surveillance system for aircraft, ships and ships