CDCE72010RGCTG4 Overview

The Tape & Reel (TR) method is used for packaging clock ICs. In the 64-VFQFN Exposed Pad package, there is an embedded clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. It contains a total of 64 terminations within RF synthesizer. For this clock generator ic, a voltage of 3.3V is required. This Clock PLL will be fed by LVCMOS, LVDS, LVPECL as its input. A total of 1 circuits are implemented to access the full performance of the electrical part. The frequency generator has a maximum frequency of 1.5GHz. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. For safety reasons, this frequency generator's supply voltage should remain above 3V. Clock PLL works with 3V~3.6V supply voltage provided. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with LVCMOS, LVDS, LVPECL logic levels. An electrical part such as this one can be classified as a Clock Synchronizer, Fanout (Distribution), Jitter Cleaner component. In this IC, a 64-bit frequency generator is designed specifically for use in microprocessors. These related electrical parts are available for the base part number CDCE72010. There is a 64 pin that is available on the digital clock generator. In terms of the supply voltage, PLL clock can handle 3.3V volts. The frequency synthesizer features 10 signal outputs to ensure as high a frequency as possible. This clock generator ic is ideally suited to the TR package. 2 inputs are employed on this electronic frequency generator.

CDCE72010RGCTG4 Features

Available in the 64-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDCE72010RGCTG4 Applications

There are a lot of Texas Instruments CDCE72010RGCTG4 Clock Generators applications.

• Main oscillator in receiver
• Bit synchronization
• Clock recovery
• Bluetooth receivers
• Wireless base station for LTE, LTE-advanced
• Electronic equipment
• Signal modulation and demodulation
• Mixed mode (analog and digital) applications
• Navigation, positioning and surveillance system for aircraft, ships and ships
• Wireless handsets