It is packaged using the Tube method since it is a clock IC. This clock generator is embedded in the 24-TSSOP (0.173, 4.40mm Width) package. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result of this, we can find 24 terminations. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. In this case, LVCMOS, Crystal is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. There is a maximum frequency of 230MHz Max with this clock-based frequency generator. The Surface Mount allows the electrical component to be installed conveniently on the panel. As long as you provide 1.7V~1.9V supply voltage, it will work. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. LVCMOS is designed for clock generator's output. As far as electrical parts go, this component can be classified as a Clock/Frequency Synthesizer component. Microprocessor-specific clock PLL with 24 bits. It is possible to find its related electronic parts by searching for the base part number CDCEL949. There is a 24 pin that is available on the frequency synthesizers. In terms of the supply voltage, analog clock generator can handle 1.8V volts. The frequency synthesizer features 9 signal outputs to ensure as high a frequency as possible. Using a frequency of 160MHz allows frequency synthesizer to achieve high efficiencies. In this case, we have a 4-element clock PLL that performs well in the absence of jitter. Data input is combined with logic clock function Clock to create this RF synthesizer.
CDCEL949PW Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Supply voltage of 1.8V Operating supply voltage of 1.8V
CDCEL949PW Applications
There are a lot of Texas Instruments CDCEL949PW Clock Generators applications.