CDCLVD110ARHBT Overview

As far as the case type is concerned, the cut smart buffer is available in 32-VFQFN Exposed Pad. Tape & Reel (TR) is the form in which it is packaged. A total of 32 terminations are present. Supply voltages of 2.5V allow for high efficiency. If this is the case, it will be mounted as Surface Mount. Electronic components classified as Fanout Buffer (Distribution), Multiplexer fall into this category. It is recommended to set the temperature to -40°C~85°C in order to achieve reliable performance. Ideally, it should be able to operate from 2.375V~2.625V volts. This item is positioned in the way of Surface Mount. On this board, there is a pin count of 32. This IC divider operates on 32 pins. It belongs to the family of CDCLVD110. The clock divider is located in Clock Driver. The buffer IC belongs to the 110 family. There is 2.625V maximum supply voltage (Vsup). As a general rule, the supply voltage (Vsup) should be maintained above 2.375V. As a default, it is set to output 10 by default. A voltage of 2.5V is recommended for maximum efficiency. The clock divider consumes 35mA quiescent current and does not react to external factors. Despite its low frequency 1.1GHz, it maintains excellent accuracy. In this case, the packing method is TR.

CDCLVD110ARHBT Features

32 terminations
The operating temperature of -40°C~85°C degrees
Clock Driver subcategory
at 1.1GHz frequency

CDCLVD110ARHBT Applications

There are a lot of Texas Instruments CDCLVD110ARHBT Clock Buffers & Drivers applications.

• Car
• Peak detection
• Clock signal format conversion
• High-speed flip-flop
• DDR4 JEDEC standard RDIMM design
• High-performance workstation
• Synchronous optical network (SONET)
• FPGA
• Internet of Things
• Fibre channel (FC)