CDCLVD1208RHDR Overview

There is a case option of 28-VFQFN Exposed Pad available for this clock divider. There is a case available for the circuit clock in Tape & Reel (TR). Under normal circumstances, 800MHz is the maximum value. 28 terminations have been recorded. With a voltage of 2.5V, high efficiency is possible. In this case, it is set up as Surface Mount. This electronic part is classified as Fanout Buffer (Distribution), Multiplexer. When the temperature is set to -40°C~85°C, reliable performance is ensured. The clock switch should operate with a voltage of 2.375V~2.625VV. It is located in the way of Surface Mount. A pin count of 28 can be found on it. There is a value of LVDS as the output. A 28 pin is used for operation. As a member of the CDCLVD1208 family, it falls under that category. There is an embedded device in Clock Drivers containing this circuit clock. It is part of the CDC family of electronic buffer ICs. This value is set to 2.625V for the maximum available supply voltage (Vsup). In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.375V. As a default, it is set to output 8. Maintaining a 2.5V supply voltage ensures maximum efficiency. It employs the TR packing method.

CDCLVD1208RHDR Features

28 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory

CDCLVD1208RHDR Applications

There are a lot of Texas Instruments CDCLVD1208RHDR Clock Buffers & Drivers applications.

• Switch
• Base station
• Measurement test
• Radar
• Mobile Internet Device (MID)
• Network attached storage
• Wired communication field
• Cell Phone (UMTS/WCDMA/GSM)
• Data transmission
• Oscilloscope and logic analyzer front ends