CDCLVP1216RGZT Overview

48-VFQFN Exposed Pad case is available for the cut smart buffer. There is a Tape & Reel (TR) packaged with it. A total of 48 terminations can be found in it. Using a supply voltage of 2.5V allows for high efficiency. A mount of Surface Mount has been applied to it. This electronic component falls under the classification of Fanout Buffer (Distribution), Multiplexer. If you wish to ensure reliable performance, you should set the temperature to -40°C~85°C. Ideally, it should be able to operate from 2.375V~3.6V volts. It is located in the way of Surface Mount. The pin count is 48. There is an output of LVPECL. Operation is performed using the 48 pins. Basically, it belongs to the same family as the CDCLVP1216. The cut smart buffer you are looking for is contained within Clock Drivers. The gadget belongs to the CDC family. The maximum supply voltage (Vsup) has been set to 3.6V. For normal operation, the supply voltage (Vsup) should be kept above 2.375V. As a default, it is set to output 16 by default. There is a 2.5/3.3V volt supply attached to it. You can also get DUMMY VAL when you use this gadget. There is no external influence on it, as it consumes 618mA quiescent current. The frequency of 2GHz maintains excellent accuracy. This method entails the use of the TR packing method.

CDCLVP1216RGZT Features

48 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 2GHz frequency

CDCLVP1216RGZT Applications

There are a lot of Texas Instruments CDCLVP1216RGZT Clock Buffers & Drivers applications.

• Storage area network
• High performance communication system
• DDR4 JEDEC standard RDIMM design
• Automatic test equipment
• Industrial automation control system
• High-end consumer electronics
• Window comparator
• Oscilloscope and logic analyzer front ends
• Hardware accelerator
• Network