CDCM7005ZVAT Overview

Clock ICs are packaged using the Tape & Reel (TR) method. Clock PLL is embedded in the 64-BGA package. This clock generator will sustain a maximum temperature of 260 when reflown. As you can see, it consists of 64 terminations. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. There is a Clock PLL called LVCMOS, LVPECL which is designed to be the input to this clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. A maximum voltage of 3V should be used for this frequency generator for safety reasons. Clock PLL works with 3V~3.6V supply voltage provided. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. The RF synthesizer is compatible with LVCMOS, LVPECL logic levels. A Clock Synchronizer and Jitter Cleaner is a classification for the electronic part in question. Clock PLL is equipped with 64 pin count. These related electrical parts are available for the base part number CDCM7005. There are a number of 64 pins that are available on the clock generators. The maximum supply voltage that clock generator can handle is 3.3V. With USER DEFINABLE FIVE DIFFERENTIAL LVPECL OUTPUT; DIFFERENTIAL VCO IN CLOCK, this clock generator produces better clock signals. Clock PLL is facilitated with 5 signal outputs to magnify output frequency as high as possible. At a frequency of 1.5GHz, the system can achieve high efficiency. A clock generator ic such as this would be well suited to the TR package. 2 inputs are employed on this electronic frequency generator.

CDCM7005ZVAT Features

Available in the 64-BGA
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDCM7005ZVAT Applications

There are a lot of Texas Instruments CDCM7005ZVAT Clock Generators applications.

• Integrated phase noise in aerospace systems
• Carrier synchronization in wired communication
• Clock signals to the high-speed Digital RF circuits
• FSK demodulators
• Frequency Modulation (FM) stereo decoders
• Main oscillator in receiver
• Motor speed controls
• Simple clock clean-up circuits
• Clock generation systems
• Signal demodulation