CDCV304PWR Overview

It is package in 8-TSSOP (0.173, 4.40mm Width) case. It is available in the case Cut Tape (CT). A total of 8 terminations can be found in it. Using a supply voltage of 2.5V allows for high efficiency. The mount is made up of Surface Mount. Electronic components classified as Fanout Buffer (Distribution) fall into this category. Set the temperature to -40°C~85°C for reliable performance. It should be capable of operating with a power supply of 2.3V~3.6V volts. There is a place for it in the way of Surface Mount. There are 8 pins on the clock buffer. Operation is performed with 8 pins. There is a family of objects known as the CDCV304. This clock divider?is econtained in Clock Drivers. It is part of the 304 family of electronic buffer ICs. In this case, the maximum supply voltage (Vsup) is set to 3.6V. For normal operation, the supply voltage (Vsup) should be kept above 2.3V. By default, the output of the circuit clock is set to 4. A supply of 3.3V volts is needed to power it. It maintains excellent accuracy at a frequency of 200MHz. It is based on the TR packing method.

CDCV304PWR Features

8 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 200MHz frequency

CDCV304PWR Applications

There are a lot of Texas Instruments CDCV304PWR Clock Buffers & Drivers applications.

• Oscilloscope and logic analyzer front ends
• Data transmission
• Internet of Things
• Smartphone
• Line receiver and signal recovery
• Clock signal duplication
• Hardware accelerator
• Radar
• 5G
• Data center