As a clock IC, PLLs is packaged using the Tube method. There is a clock generator embedded in the 48-TFSOP (0.240, 6.10mm Width) package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As a result, frequency synthesizers can be found to contain 48 terminations. The supply voltage of 2.5V allows for high efficiency. A clock generator's input is called Clock and it is designed as the input for this clock generator. To access the full performance of the electronic component, 1 circuits are implemented. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock PLL is capable of receiving a maximum of 2.7V as a supply voltage. For safety reasons, this frequency synthesizer should have a voltage supply above 2.3V. As long as there are 2.3V~2.7V supply voltages provided, clock generator ic should work. Based on test statistics, ambient temperature should be set at 0°C~85°C. It has been classified as a PLL Clock Driver electronic part, which means that it is a semiconductor. In this IC, a 48-bit frequency generator is designed specifically for use in microprocessors. This part number is related to its related electronic parts. There are a number of 48 pins that are available on the frequency synthesizers. RF synthesizers can handle a voltage of 2.5V as the supply voltage. 10 signal outputs allow for maximi10ation of output frequency. At maximum 0.075 ns, this analog clock generator has low timing skew. When searching for parts of the 857 family, similar frequency generators will be found. Frequency generator is able to reali200MHze high efficiency when operating at a frequency of 200MHz.
CDCV857DGG Features
Available in the 48-TFSOP (0.240, 6.10mm Width) Supply voltage of 2.5V Operating supply voltage of 2.5V
CDCV857DGG Applications
There are a lot of Texas Instruments CDCV857DGG Clock Generators applications.