CDCVF111FNRG4 Overview

There is a case of 28-LCC (J-Lead) in which it is packaged. It is available in the case Tape & Reel (TR). It is recommended that the maximum value for normal operation is 650MHz. In it, there are 28 terminations. High efficiency is feasible with a supply voltage of 3.3V. It's?set?up?in?the?way?of?Surface Mount. Electronic components classified as Fanout Buffer (Distribution) fall into this category. Set the temperature to -40°C~85°C for reliable performance. It should be capable of operating with a power supply of 3V~3.6V volts. As a result, it is placed in the way of Surface Mount. The pin count is 28. Operation is performed using the 28 pins. Basically, it belongs to the same family as the CDCVF111. A cut smart buffer of this type is contained in Clock Drivers. It is part of the 111 family of electronic buffer ICs. A maximum supply voltage (Vsup) is set to 3.6V. As a rule, the supply voltage (Vsup) should be kept above 3V for normal operation. By default, it is set to output 9. The supply voltage should be kept at 3.3V for maximum efficiency. There is no external influence on it, as it consumes 100mA quiescent current. This method employs the TR packing method.

CDCVF111FNRG4 Features

28 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory

CDCVF111FNRG4 Applications

There are a lot of Texas Instruments CDCVF111FNRG4 Clock Buffers & Drivers applications.

• Dual core processor workstations and servers
• Mobile Internet Device (MID)
• High reliability telecommunication system
• Clock signal format conversion
• High speed line receiver
• Network
• Defense and aerospace equipment
• Consumer Electronics
• Patient diagnosis
• Peak detection