CDCVF2505DR Overview

As a clock IC, it uses the Tape & Reel (TR) package. Clock PLL is embedded in the 8-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 8 terminations can be found in frequency synthesizer. For this clock generator ic, a voltage of 3.3V is required. The input of this clock generator is designed to be LVTTL. For a full understanding of the electronic part's performance, 1 circuits are implemented. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There is a maximum voltage of 3.6V for this clock generator. A maximum voltage of 3V should be used for this frequency generator for safety reasons. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Based on test statistics, ambient temperature should be set at -40°C~85°C. It has been classified as a PLL Clock Driver electronic part, which means that it is a semiconductor. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. The related electrical components for the base part number CDCVF2505 can be found below. There is an available 8 pin on the clock generators. Electronic frequency generator can handle voltages up to 3.3V. A Clock Drivers clock generator is essentially what this device is. Clock PLL is configured with 4 output. Using a frequency of 200MHz allows frequency synthesizer to achieve high efficiencies. Depending on the load capacitance, the analog clock generator can deliver a value of 25pF. TR is an ideal package for this electronic frequency generator.

CDCVF2505DR Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 25pF

CDCVF2505DR Applications

There are a lot of Texas Instruments CDCVF2505DR Clock Generators applications.

• Line cards used in telephone exchange
• FSK demodulators
• Laptops
• Melting
• Satellite receivers
• Clock synchronization
• Closed circuit systems
• Multi-function printers
• Reference signals to RF systems
• Signal analyzer