The Tube method is used for packaging clock ICs. As part of the 8-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 8 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, LVTTL is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. The Surface Mount allows the electrical component to be installed conveniently on the panel. 3.6V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. It has been classified as a PLL Clock Driver electronic part, which means that it is a semiconductor. It is a 8-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number CDCVF2505. There are 8 pins on the frequency generators that are available for use. Supply voltage 3.3V is what clock generator can handle. 4 signal outputs are provided for enhancing output frequency as much as possible. Using a frequency of 200MHz allows frequency synthesizer to achieve high efficiencies. In other words, PLL is capable of delivering a load capacitance of 25pF.
CDCVF2505PW Features
Available in the 8-TSSOP (0.173, 4.40mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V Load capacitance of 25pF
CDCVF2505PW Applications
There are a lot of Texas Instruments CDCVF2505PW Clock Generators applications.