It is packaged using the Tape & Reel (TR) method since it is a clock IC. Clock PLL is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. There are 16 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. There is a Clock PLL called LVTTL which is designed to be the input to this clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Surface Mount-slots make it easy to mount this electronic component on panels. There is a maximum voltage of 3.6V for this clock generator. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. It is possible to classify this electronic component as a PLL Clock Driver. It is a 16-bit IC that is designed for microprocessors specifically. According to the base part number CDCVF25081, its related parts can be found. PF synthesizers is equipped with 16 pins. RF synthesizers can handle voltages up to 3.3V. This clock generator can be classified as a kind of Clock Drivers in general. The output frequency can be magnified as high as possible with the assistance of 8 signal outputs. By operating at a frequency of 200MHz, frequency generator is able to achieve high efficiency. A loading capacitance of 25pF is capable of being delivered through it. Ideally, this electronic frequency generator fits the TR package.
CDCVF25081PWRG4 Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V Load capacitance of 25pF
CDCVF25081PWRG4 Applications
There are a lot of Texas Instruments CDCVF25081PWRG4 Clock Generators applications.