As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 24-TSSOP (0.173, 4.40mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 24 terminations can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. LVTTL is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. This clock-based frequency generator provides a frequency up to 175MHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage this clock generator would take is 3.6V. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. Clock PLL works with 3V~3.6V supply voltage provided. The ambient temperature should be set at 0°C~85°C, which is estimated by the test statistics. This electronic component can be classified as a PLL Clock Driver. This clock-generating IC is a 24-bit device designed explicitly for microprocessors. According to the base part number CDCVF2509, its related parts can be found. There is an available 24 pin on the clock generators. RF synthesizers can handle voltages up to 3.3V. And basically, this clock generator is often classified as a kind of Clock Drivers. Clock PLL is facilitated with 9 signal outputs to magnify output frequency as high as possible. Analog clock generator is capable of delivering a load capacitance of 25pF. The TR package suits this RF synthesizer ideally.
CDCVF2509APWR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V Load capacitance of 25pF
CDCVF2509APWR Applications
There are a lot of Texas Instruments CDCVF2509APWR Clock Generators applications.