Clock ICs are packaged using the Tube method. 24-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. It contains 24 terminations that can be found in frequency synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. It is designed that the Clock PLL's input should be LVTTL. To access the full performance of the electronic component, 1 circuits are implemented. With the Surface Mount, it is easy to install this electric component on the panel. The maximum voltage this clock PLL can handle is 3.6V. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. The ambient temperature should be set at 0°C~85°C, which is estimated by the test statistics. As far as this electronic part is concerned, it can be classified as a PLL Clock Driver component. There is a 24-bit clock-generating IC built specifically for microprocessors in this frequency generator. This part number CDCVF2510 is related to the following electrical components. There are 24 pins on the frequency generator that are available for use. Supply voltage 3.3V is what time clock generator can handle. Fundamentally, this is a kind of Clock Drivers clock PLL. Clock PLL is configured with 10 output. By operating at a frequency of 175MHz, RF synthesizer is able to reali175MHze high efficiency. In this case, we are referring to the load capacitance which is 25pF.
CDCVF2510APW Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V Load capacitance of 25pF
CDCVF2510APW Applications
There are a lot of Texas Instruments CDCVF2510APW Clock Generators applications.