Tube-method packaging is used for clock ICs. The 28-TSSOP (0.173, 4.40mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 28 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 2.5V. The input of this clock generator is designed to be SSTL-2. To access the full performance of the electronic component, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 2.7V. For safety reasons, this frequency synthesizer should have a voltage supply above 2.3V. As far as the supply voltage is concerned, clock PLL can be used with 2.3V~2.7V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. This electronic component is usually classified as a PLL Clock Driver component. The clock-generating IC is a 28-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CDCVF855. It is possible to connect to the frequency generators via 28 pins. There is a maximum supply voltage of 2.5V that clock generator can handle. This clock generator can be classified as a kind of Clock Drivers in general. 4 signal outputs enable clock PLL to magnify output frequency as high as possible. When searching for parts of the 855 family, similar frequency generators will be found. At a frequency of 220MHz, frequency generator is capable of achieving high efficiency.
CDCVF855PWG4 Features
Available in the 28-TSSOP (0.173, 4.40mm Width) Supply voltage of 2.5V Operating supply voltage of 2.5V
CDCVF855PWG4 Applications
There are a lot of Texas Instruments CDCVF855PWG4 Clock Generators applications.