As a clock IC, it uses the Tape & Reel (TR) package. The 28-TSSOP (0.173, 4.40mm Width) package contains this clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. In it, there are 28 terminations to be found. This time clock generator should be voltaged at 2.5V. A clock generator's input is called SSTL-2 and it is designed as the input for this clock generator. A total of 1 circuits are implemented to access the full performance of the electrical part. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock PLL is capable of receiving a maximum of 2.7V as a supply voltage. For safety reasons, this frequency synthesizer should have a voltage supply above 2.3V. As long as there are 2.3V~2.7V supply voltages provided, clock generator ic should work. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. This electronic component is usually classified as a PLL Clock Driver component. The clock-generating IC is a 28-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CDCVF855. A 28 pin is available on the PLL. Supply voltage 2.5V is what time clock generator can handle. And basically, this clock generator is often classified as a kind of Clock Drivers. Clock PLL has 4 signal outputs to maximi4e output frequency. You can find similar clock generators by searching for the 855 family. Frequency generator is able to reali220MHze high efficiency when operating at a frequency of 220MHz. This clock generator ic is ideally suited to the TR package.
CDCVF855PWR Features
Available in the 28-TSSOP (0.173, 4.40mm Width) Supply voltage of 2.5V Operating supply voltage of 2.5V
CDCVF855PWR Applications
There are a lot of Texas Instruments CDCVF855PWR Clock Generators applications.