Tape & Reel (TR)-method packaging is used for clock ICs. The 40-VFQFN Exposed Pad package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 40 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 2.5V. The input of this clock generator is designed to be SSTL-2. To access the full performance of the electronic component, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 2.7V. For safety reasons, this frequency synthesizer should have a voltage supply above 2.3V. As far as the supply voltage is concerned, clock PLL can be used with 2.3V~2.7V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. This electronic component is usually classified as a PLL Clock Driver component. The clock-generating IC is a 40-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CDCVF857. It is possible to connect to the frequency generators via 40 pins. There is a maximum supply voltage of 2.5V that clock generator can handle. 10 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.04 ns Max, this clock generator offers low timing skew. When searching for parts of the 857 family, similar frequency generators will be found. At a frequency of 220MHz, frequency generator is capable of achieving high efficiency. This clock generator ic is ideally suited to the TR package.
CDCVF857RHATG4 Features
Available in the 40-VFQFN Exposed Pad Supply voltage of 2.5V Operating supply voltage of 2.5V
CDCVF857RHATG4 Applications
There are a lot of Texas Instruments CDCVF857RHATG4 Clock Generators applications.