CGS74LCT2524M Overview

There is a case option of 8-SOIC (0.154, 3.90mm Width) available for this clock divider. There is a Tube packaged with it. A total of 8 terminations can be found in it. With a supply voltage of 3.3V, high efficiency is possible. It's?set?up?in?the?way?of?Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). It is recommended to set the temperature to 0°C~70°C in order to ensure reliable performance. Ideally, it should be able to operate from 3V~3.6V volts. It is located in the way of Surface Mount. Buffer IC is TTL that is output. It is a member of the 74LCT2524 family. The circuit clock is contained in Clock Drivers. The buffer IC belongs to the LCT family. In this case, Vsup will be set to 3.6V (decimal). A voltage higher than 3V is necessary for normal operation of the system. By default, the output of the circuit clock is set to 4. A supply of 3.3V volts is needed to power it. The 74LCT series is the name of this electronic component. As long as the frequency of the clock switch is set to 75MHz, excellent accuracy can be achieved.

CGS74LCT2524M Features

8 terminations
The operating temperature of 0°C~70°C degrees
Clock Drivers subcategory
at 75MHz frequency

CGS74LCT2524M Applications

There are a lot of Texas Instruments CGS74LCT2524M Clock Buffers & Drivers applications.

• Synchronous optical network (SONET)
• 5G
• DDR4 JEDEC standard RDIMM design
• Backplane
• High speed line receiver
• Aviation
• Other PCIe Gen2 networking applications
• Industrial automation control system
• Host bus adapter card
• Clock signal level shifting