4.75V~5.25V 250MHz 8 Bit D-Type Flip Flop DUAL 74FCT374 20 Pins 200μA 74FCT Series 20-SOIC (0.295, 7.50mm Width)
SOT-23
CY74FCT374CTSOCTE4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
20-SOIC (0.295, 7.50mm Width)
Number of Pins
20
Weight
500.709277mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Series
74FCT
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
20
Type
D-Type
Subcategory
FF/Latches
Packing Method
TAPE AND REEL
Technology
CMOS
Voltage - Supply
4.75V~5.25V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Supply Voltage
5V
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
74FCT374
Function
Standard
Qualification Status
Not Qualified
Output Type
Tri-State, Non-Inverted
Number of Elements
1
Polarity
Non-Inverting
Supply Voltage-Max (Vsup)
5.25V
Power Supplies
5V
Supply Voltage-Min (Vsup)
4.75V
Number of Circuits
8
Load Capacitance
50pF
Number of Ports
2
Output Current
64mA
Number of Bits
8
Clock Frequency
250MHz
Propagation Delay
5.2 ns
Turn On Delay Time
2 ns
Family
FCT
Current - Quiescent (Iq)
200μA
Current - Output High, Low
32mA 64mA
Max I(ol)
0.064 A
Max Propagation Delay @ V, Max CL
5.2ns @ 5V, 50pF
Trigger Type
Positive Edge
Input Capacitance
5pF
Number of Output Lines
3
Clock Edge Trigger Type
Positive Edge
Height Seated (Max)
2.65mm
Width
7.5mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
CY74FCT374CTSOCTE4 Product Details
CY74FCT374CTSOCTE4 Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. This output is configured with Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. It is mounted in the way of Surface Mount. With a supply voltage of 4.75V~5.25V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74FCTseries FPGA. Its output frequency should not exceed 250MHz Hz. D latch consists of 1 elements. As a result, it consumes 200μA of quiescent current without being affected by external factors. The number of terminations is 20. Members of the 74FCT374family make up this object. Power is supplied from a voltage of 5V volts. There is 5pF input capacitance for this T flip flop. Electronic devices of this type belong to the FCTfamily. It is mounted by the way of Surface Mount. 20pins are included in its design. Its clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. Vsup reaches its maximum value at 5.25V. A normal operating voltage (Vsup) should remain above 4.75V. The superior flexibility of this circuit is achieved by using 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. The flip flop has 2ports embedded within it. Its output current of 64mAallows for maximum design flexibility. To operate, the chip has a total of 3 output lines.
CY74FCT374CTSOCTE4 Features
Tape & Reel (TR) package 74FCT series 20 pins 8 Bits 5V power supplies
CY74FCT374CTSOCTE4 Applications
There are a lot of Texas Instruments CY74FCT374CTSOCTE4 Flip Flops applications.