CY74FCT573CTQCT Overview

It is embedded in the 20-SSOP (0.154, 3.90mm Width) package. It is packaged in the way of Tape & Reel (TR). It is configured with an output of Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.75V~5.25V. A temperature of -40°C~85°C is set as the operating temperature. An FPGA in this series belongs to the 74FCT family. Electronic parts with 8 bits are designed for this application. In this device, there are 20 terminations that have been designed. The family it belongs to is 74FCT573. A 5V voltage supply is required for operation. There are 20 pins attached to it. FCT is the family name of this electronic device. With the design of the board, there are only 20 pins. A Surface Mount mounting method has been used for this electronic part. 2 ports are available on this device. This part is included in FF/Latches. A total of 5V power supplies are needed to run it. Based on its reliable performance, this device is appropriate for TR. Its output current of 64mA ensures maximum design flexibility. High efficiency requires a supply voltage of 5V. Input lines are converted into binary equivalents by 8 output lines. The current consumed by the device is 100μA volts in quiescent mode, which cannot be affected by external factors. 1 elements are present in it. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.2mA.

CY74FCT573CTQCT Features

20-SSOP (0.154, 3.90mm Width) package
74FCT series
8 Bits
74FCT573 family
20 pin count
20 pins
5V power supplies
1 elements

CY74FCT573CTQCT Applications

There are a lot of Texas Instruments CY74FCT573CTQCT Latches applications.

• Multistage ripple counting
• Four-bit storage with output enable
• Buffer Storage
• Audio and video switching
• A/D and D/A conversion
• Shift Registers
• OC-48 communication systems
• Display driver
• Frequency
• Pseudo-random code generators