DRV8832QDGQQ1 Overview

Drivers controllers is designed with Tube package.The part is packged with 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad case.Drivers controllers is recommended to mount the part by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in Battery Powered.The device can supply 2.75V~6.8V volts.With regard to operating temperature, it ranges -40°C~150°C TJ. The motor type can be classified as Brushed DC.There are 10 terminations available in the part.The voltage can applied to the load at the rate of 2.75V~6.8V.Please take in mind that this amplifier should be run at 3V.Its recommended mounting way is Surface Mount.Keep the part output current at 1A.The device employs the BRUSH DC MOTOR CONTROLLER analog IC.Drivers controllers is based on the DRV8832 part number.Drivers controllers is designed wDrivers controllersh 10 pins.There are 1 outputs available.The output voltage is maintained at 1.285V.Automotive, AEC-Q100 is the main series of the part.

DRV8832QDGQQ1 Features

Applications : Battery Powered
Load voltage across the chip 2.75V~6.8V
base on DRV8832 number
designed with 1 outputs

DRV8832QDGQQ1 Applications

There are a lot of Texas Instruments
DRV8832QDGQQ1 motor drivers applications.

• Mobile phone display backlight and key light driving
• High power LED street light
• Large outdoor LED display
• Commercial office
• Hospitality buildings
• Smart lighting applications
• Automotive applications
• Dome
• Dash
• Footwell lighting