DRV8870DDA Overview

The design contains a Tubepackage.This part is packed in a 8-PowerSOIC (0.154, 3.90mm Width) case.Drivers controllers is recommended that the part be mounted by Surface Mount.For the component connected to [0], it is suitable.This device is capable of supplying voltages up to 0V~5.5V volts.Operation temperature ranges from -40°C~150°C TJ.This motor type can be categorized as Brushed DC.A total of 8terminations are available in this part.There is the option of applying the voltage to the load at the rate of 6.5V~45V.Drivers controllers is very important to keep in mind that this amplifier should be operated at 12V.There is a recommended mounting method of Surface Mount.Maintain a current of 3.6A for the part output.An analog IC with the model number BRUSH DC MOTOR CONTROLLERis employed in the device.This can be determined by looking at the DRV8870 part number.8pins are present on the device.A voltage of 45V is used as the supply voltage for this driver.

DRV8870DDA Features

Applications : DC Motors, General Purpose, Stepper Motors
Load voltage across the chip 6.5V~45V
base on DRV8870 number

DRV8870DDA Applications

There are a lot of Texas Instruments
DRV8870DDA motor drivers applications.

• Dash
• Footwell lighting
• Indicator
• Telltale lights
• Infotainment backlighting
• Tail lights
• Turn signals
• Brake lights
• CHMSL (center high-mount stop lamps)
• parking lights