DS25MB200TSQ Overview

For convenience, power buffer comes packaged in 48-WFQFN Exposed Pad.Package number Tape & Reel (TR) is ready for power buffer.Surface Mount Universal mout to make it easier for you to adjust.When it comes to types, this is a typical Buffer, Multiplexer.This op amp buffer uses 3.135V~3.465V voltage for work.The output quality is maintained by collaborating between 2 x 1:2, 2:1 channels.CML input is enabled.A -40°C~85°C operating temperature is recommended to avoid malfunctions.With "DS25MB200," you will find more pin-to-pin solutions.An op amp buffer with 48 terminals can be found on the left side of the op amp buffer.As long as the splitter is supplied with 3.3V voltage, it can perform a wide range of demanding tasks.This power buffer has 48 pins as its pinout.In addition, it has 48 pins.It is mounted on PCBs or other boards using a Surface Mount.The power buffer and other Line Driver or Receivers play an important role in the industry.2-Bit receiver is used.Power supplies from 3.3V are sufficient for the repeters to run.

DS25MB200TSQ Features

2 x 1:2, 2:1 channels.
A standard Line Driver or Receivers.
2-Bit receiver.

DS25MB200TSQ Applications

There are a lot of Texas Instruments DS25MB200TSQ Signal Buffers, Repeaters, Splitters applications.

• Storage Area Networks
• Desktop Computers
• Protection Switching
• PECL-to-LVDS Translation
• Multidrop Buses
• Industrial PCs
• SATA SSDs or HDDs
• Network Switches/Routers
• Digital Crossconnects
• Medical