Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DS36C278TM/NOPB

DS36C278TM/NOPB

DS36C278TM/NOPB

Texas Instruments

8 Terminations5V 8 Pin DS36C278 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

SOT-23

DS36C278TM/NOPB Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 142.994995mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Transceiver
Terminal Finish Matte Tin (Sn)
Subcategory Line Driver or Receivers
Technology CMOS
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number DS36C278
Pin Count 8
Operating Supply Voltage 5V
Power Supplies 5V
Interface RS-485
Operating Supply Current 500μA
Nominal Supply Current 500μA
Max Supply Current 500μA
Differential Output YES
Protocol RS422, RS485
Input Characteristics DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers 1/1
Driver Number of Bits 1
Duplex Half
Receiver Hysteresis 70mV
ESD Protection Yes
Receive Delay-Max 400 ns
Output Low Current-Max 0.004A
Number of Receivers 1
High Level Input Current-Max 0.000002A
Height 1.499mm
Length 5mm
Width 3.988mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
DS36C278TM/NOPB Product Details

DS36C278TM/NOPB Overview


Driver ICs with enhanced 8-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.The Tube package houses this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.Any Surface Mount-type PCB or development board can be used with this wide receiver.Power supply requirements for this differential driver are 4.75V~5.25V.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.Driver ICs with a supply voltage range of 5V can operate efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.This transceiver is packaged with 8 market standard pinoutsThe base part number DS36C278 identifies the product type, temperature, package, etc., so you can search for more variants by using it.8-pin driver chip with enhanced power dissipation.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.An input voltage supply of 5V is required to operate the transceiver module.There is a subcategory named Line Driver or Receivers for this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.There are also 1 receivers in it as well.Using the input voltage of 500μA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.A can transceiver that has a current input of 500μA or greater may be affected by malfunctions.

DS36C278TM/NOPB Features


Tube package
8 pin count
8 pins
5V power supply

DS36C278TM/NOPB Applications


There are a lot of Texas Instruments DS36C278TM/NOPB Drivers/Receivers/Transceivers applications.

  • Wireless multimedia center in smart home
  • Thermal management
  • Wireless 3D game
  • Mainframes, workstations or storage devices
  • Car radio
  • WDM transmission
  • Satellite ground stations
  • Servers
  • Remote controls
  • Fiber optic cable connection network

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News