Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DS36C278TMX/NOPB

DS36C278TMX/NOPB

DS36C278TMX/NOPB

Texas Instruments

8 Terminations5V 8 Pin DS36C278 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

SOT-23

DS36C278TMX/NOPB Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 142.994995mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Transceiver
Subcategory Line Driver or Receivers
Technology CMOS
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number DS36C278
Pin Count 8
Operating Supply Voltage 5V
Power Supplies 5V
Operating Supply Current 500μA
Nominal Supply Current 500μA
Max Supply Current 500μA
Data Rate 100 kbps
Differential Output YES
Protocol RS422, RS485
Input Characteristics DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers 1/1
Driver Number of Bits 1
Duplex Half
Receiver Hysteresis 70mV
ESD Protection Yes
Receive Delay-Max 400 ns
Output Low Current-Max 0.004A
Number of Receivers 1
High Level Input Current-Max 0.000002A
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
DS36C278TMX/NOPB Product Details

DS36C278TMX/NOPB Overview


An excellent driver IC for common LEDs thanks to its enhanced 8-SOIC (0.154, 3.90mm Width) package.This receiver is mounted in the Tape & Reel (TR) package.As a Transceiver can transceiver, this part has enabled many applications to be served.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver uses 4.75V~5.25V for power supply.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver is designed for applications with a temperature of -40°C~85°C.An operating voltage range of 5V is suitable for this line driver ic.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.Since the part number DS36C278 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation driver IC with 8 pins.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.An important feature of this ic receiver was its 1-bit resolution capability.This transceiver module is designed to operate from an input voltage supply of 5V.Line Driver or Receivers is a subcategory of this rf transceiver module.It is designed so that it can be operated from a 5V power supply with this driver IC.This rf transceiver module can have?up to 1 eligible receivers on the field at once.?It is capable of driving LEDs with a voltage of 500μA as the input voltage to this integrating circuit.When the input current reaches or exceeds 500μA, this can transceiver could have mal-functions.

DS36C278TMX/NOPB Features


Tape & Reel (TR) package
8 pin count
8 pins
5V power supply

DS36C278TMX/NOPB Applications


There are a lot of Texas Instruments DS36C278TMX/NOPB Drivers/Receivers/Transceivers applications.

  • Car radio
  • Military satellite communications
  • Interconnection between switches and computers
  • Shortwave receiver
  • Remote controls
  • Wireless HD Photography
  • Wireless access points
  • Fiber distributed data interface (FDDI)
  • Fiber-to-the-desktop
  • Optical sub-assembly (OSA)

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News