Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DS75176BTM/NOPB

DS75176BTM/NOPB

DS75176BTM/NOPB

Texas Instruments

8 Terminations5V 8 Pin DS75176 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

SOT-23

DS75176BTM/NOPB Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Transceiver
Subcategory Line Driver or Receivers
Max Power Dissipation 675mW
Technology BIPOLAR
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number DS75176
Pin Count 8
Operating Supply Voltage 5V
Power Supplies 5V
Voltage 7V
Interface RS-422, RS-485
Nominal Supply Current 55mA
Max Supply Current 55mA
Propagation Delay 37 ns
Data Rate 10 Mbps
Differential Output YES
Protocol RS422, RS485
Input Characteristics DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers 1/1
Driver Number of Bits 1
Duplex Half
Receiver Hysteresis 70mV
ESD Protection Yes
Simplex/Duplex Half Duplex
Transmit Delay-Max 22 ns
Number of Receivers 1
High Level Input Current-Max 0.00002A
Height 1.45mm
Length 4.9mm
Width 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
DS75176BTM/NOPB Product Details

DS75176BTM/NOPB Overview


With the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.In this package, the receiver is mounted in the Tube format.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.On any Surface Mount-type PCB or development board, you can install this wide receiver.A power supply of 4.75V~5.25V is used by this differential driver.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.This integrated circuit has 8 terminations designed for driving and receiving signals from data.ICs that are packaged with market standard pinouts are available on the market.For more variants of this part, try searching with the base part number DS75176, which indicates the product type, temperature, package, etc.8-pin driver IC with improved power dissipation control.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.It was possible to achieve a 1-bit resolution through this ic receiver.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.This driver IC is designed to operate from a 5V power supply.In module isolated transceiver are 1 receivers.can transceivers with an input current greater than 55mA may have malfunctions.

DS75176BTM/NOPB Features


Tube package
8 pin count
8 pins
5V power supply

DS75176BTM/NOPB Applications


There are a lot of Texas Instruments DS75176BTM/NOPB Drivers/Receivers/Transceivers applications.

  • Car alarm systems
  • IPTV front end
  • Military satellite communications
  • Wireless multimedia center in smart home
  • Ethernet circuitry
  • TV signal transmission
  • Optical sub-assembly (OSA)
  • Fiber distributed data interface (FDDI)
  • Metro access rings
  • Switches

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News