HPA00015PWR Overview

Tape & Reel (TR)-method packaging is used for clock ICs. The TSSOP package contains this clock generator. It contains 24 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. This clock generator would require a maximum supply voltage of 3.6V. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. You can find related electrical components to the base part number HPA00015. It is possible to connect to the frequency generators via 24 pins. Despite its low-temperature operation, this clock generator ic is capable of 0°C operations. Despite its attenuated performance, this frequency synthesizer can last at 85°C. 10 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.1 ns Max, this clock generator offers low timing skew. When searching for parts of the CDCV family, similar frequency generators will be found. Logic circuits based on PLL BASED CLOCK DRIVER logic use this electronic frequency generator. In terms of load capacitance, analog clock generator is capable of delivering 25pF. MUX input conditioning makes physical input clock PLLs into control signals. This clock generator ic is ideally suited to the TR package.

HPA00015PWR Features

Available in the TSSOP
Supply voltage of 3.3V
Load capacitance of 25pF

HPA00015PWR Applications

There are a lot of Texas Instruments
HPA00015PWR Clock Generators applications.

• Automatic test equipment
• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange