INA103KP Overview

In order to protect the op amps, a 16-DIP (0.300, 7.62mm) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 16. It consists of a total of 16 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It has 16 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 30μV. This electronic component is recommended to be mounted using the mounting type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 9mA and 10 . Maintain 60dB as the voltage gain. Buffer op amp is equipped with 1 channels on the device. As a whole, there are 3 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 50V. There is an 9mA quiescent current in linear amplifier. It is important to keep the resistance within the 60MOhm range of the op amps.

INA103KP Features

16 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 60MOhm

INA103KP Applications

There are a lot of Texas Instruments
INA103KP Instrumentational OP Amps applications.

• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification