INA111AU/1KE4 Overview
Packaging for the buffer amplifier is in the form of a 16-SOIC (0.295, 7.50mm Width) case. An op amp ic of the Instrumentation type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations is approaching the 16 mark. In this case, there are 16 pins on the board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. There are 16 pins on this chip. Regarding input offset voltage, op amp rates 1mV. The mounting type that is recommended for this electrical part is Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is a member of the 80dB's 80dB family. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 3 elements in this buffer amplifier. The linear amplifier is packaged by using a TR axis. The current is quiescent at 3.3mA. During testing, the buffer amplifier resistance should remain within a range of 10 TΩ.
INA111AU/1KE4 Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10 TΩ
INA111AU/1KE4 Applications
There are a lot of Texas Instruments INA111AU/1KE4 Instrumentational OP Amps applications.
- Thermocouples
- Oscilloscopes
- Communication device
- Inverse/same-phase proportional circuit
- Blood pressure sensors
- PDA
- Power control
- Automation control systems
- Differentiator circuits
- Mobile phone
