INA125UA/2K5E4 Overview
There is a D case in which the instrumentation amplifier is packaged. Buffer amps of this type are called INSTRUMENTATION AMPLIFIER-types. A Tape and Reel case is used to deliver the buffer op amp. The number of terminations is approaching the 16 mark. The total number of pins on linear amplifier is 16. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Instrumentation Amplifier devices. 16 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 250μV. 80dB should be the voltage gain. Op amp ic has 1 channels. In order for this buffer op amp to function, it should have a temperature of at least -55°C degrees Celsius. At temperatures greater than 125°C, Instrumentation amplifier should not be used. There are 2 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. The electrical part is capable of being powered by a voltage of under 36V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.7V. As a general rule, you should conduct this electronic component under dual supply voltages of 18V volts. There is an 460μA quiescent current running through op amp ic. 100GOhm is the range in which the op amp resistance should lie.
INA125UA/2K5E4 Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA125UA/2K5E4 Applications
There are a lot of Texas Instruments
INA125UA/2K5E4 Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
