INA126E/250G4 Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the Instrumentation-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 250μV. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Op amp is a member of the 80dB's 80dB family. In total, there are 1 circuits on this buffer amplifier. Op amp has total of 2 elements. To pack the operational amplifier ics, TR is adopted as the packing method. Buffer amplifier has a quiescent current of 175μA. It is important to keep the resistance within the 1GOhm range of the linear amplifier.
INA126E/250G4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 1GOhm
INA126E/250G4 Applications
There are a lot of Texas Instruments INA126E/250G4 Instrumentational OP Amps applications.
- Signal filtering
- Broadcasting
- Biopotential
- Fast A/D and D/A converters
- Voltage regulation circuit
- Scintillation detectors
- Radar
- Comparator
- Weak signal detection
- Radiation thermometry transducers
