INA128UAG4 Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the Instrumentation type. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be 8 terminations in the next few months. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 15V battery. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 25μV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. As long as the supply current of the chip does not exceed 700μA, this op amp ic can operate. 80dB should be the voltage gain. There are 1 circuits on this op amp. A total of 3 elements are present in this linear amplifier. Buffer amplifier has a quiescent current of 700μA. During testing, the buffer amplifier resistance should remain within a range of 100GOhm.

INA128UAG4 Features

8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm

INA128UAG4 Applications

There are a lot of Texas Instruments INA128UAG4 Instrumentational OP Amps applications.

• Multiplication circuits
• Multimedia playback equipment
• Signal filtering
• Thermocouples
• Automation control systems
• Switching amplifier
• Communication device
• Biopotential
• Ultrasound transducers
• Weak signal detection